wiring diagram

[blueridge]

Hi does anyone have a 6 switch wiring diagram for a single 12v rayvern pump with one dump on pump and 1 for each ram?
i want to have 1 switch for each corner, 1 switch for fronts and 1 switch for rears.All switches have 6 terminals.
Also what do i need to change if i wanted to run it on 24v?
thanks in advance Damien

[Tony100]

[blueridge]

thanks for that diagram but thats only for two switches

[fatdaddy]

got a night shift.
let me see if I get time to draw something ready for the morning

[blueridge]

thanks fatdaddy

[Tony100]

"1 switch for fronts and 1 switch for rears"<< 2 switches??

"1 switch for each corner" << 4 switches?? im confused?

[fatdaddy]

worked one out but not drawn in a "web" format. going to bed now!
(you will have to use diodes to use 6 prong switches for all your moves]

[blueridge]

I've already got some diodes ready to fit.With the help with Tony's diagram which is how i already had it wired for two switches.i made up this diagram for 4 switches.

 i have wired it that way but its not working right.it raises fine but maybe a bit slow but the whole car drops in one go on any switch.
here is how its plumbed up.

[blueridge]

ive just done some more checks and it seems to be the rear dumps are not holding presure.if i disconnect them they stop it from raising but it still drops when operating the front dump while the rears are disconnected.

[fatdaddy]

if the rear dumps are S-2a configuration they do only hold pressure one way.................

[blueridge]

mine are s-2a does anyone make dumps that hold pressure both ways? ifso how much am i looking to spend? 

[fatdaddy]

you need lock valves. all valve manufacturers make them around £90 each at a guess retail.
give me the numbers on yours [around the hex on the stem] and the AF measurment of the hex

i may have some around..........

[blueridge]

at the moment on the rear i have a pair of S2A00 018    19mm AF
for the front dumps i have a pair of EDI 06030200 11811014.
the front dumps work fine its just the rears i need to replace.

[fatdaddy]

i'll try to make time to look tomorow

[blueridge]

thanks again fatdaddy