hello well its taken me a while so here is a tease
from start to finnish i dont know how to put the pics on
i hope this works
the first couple are during the work and last are the last pictures of cleanup
well after i got it i removed the metal from the last one to work on it. i cleaned it up and welded the frame some more.
using old pieces i made templets. i used up what i could from what was there it fit and was close to shape so why not
i took piece off the centre of the x and reinforced inside and put a piece of the plate back on then the giant X piece that i recut to the templet i had made. then just started covering it from bottom then sides leaving a large gap between plates to get good strong weld on all metal then fixed a big dent in the belly and plated put box tubing in the rearend. i plated it and welded her up flipped her over
and did it on the other side worked making it all look fuq n beautiful cleaned all welds down made every piece of metal touch metal show quality for a show man
and thats it what does ya'll think
